Peralta Concrete Construction logo
Broom finish concrete patio with integrated steps
Palmdale, CA & the Antelope Valley

Concrete patios & walkways

Clean, durable concrete for patios, walkways, and side yards.

New clients get 10% off any new project booked with us

Get a free quote

By submitting you agree to be contacted about your project. We respect your privacy. For faster service, call (213) 926-8243.

What's included

A concrete patio or walkway gets the same base prep and reinforcement as a driveway, sized down to what a walking surface actually needs — compacted base, control joints, and a finish that matches how you'll use the space. Broom finish is the standard, low-cost option; exposed aggregate and integral color cost more but hold up well against high-desert sun without fading the way a surface stain can.

Slope and drainage matter as much as the finish. Every patio and walkway is graded with a slight pitch away from the house — usually a minimum of about a quarter inch of fall per foot — so water doesn't pool against the foundation or track back toward a slider door during one of our summer monsoon downpours.

How it works

Step by step, here's what actually happens on site:

  1. 1Walk the space with you and talk through finish, size, and how it connects to existing walkways or a future backyard remodel.
  2. 2Excavate and compact the base, form the pour area, and set reinforcement.
  3. 3Pour and finish the concrete, then cut control joints while it's still workable.
  4. 4Cure, then walk the finished job with you before calling it done.

Why Peralta Concrete

Every patio and walkway is graded for real drainage, not just poured flat — that's the difference between a patio that sheds water and one that puddles after the first real rain.

We size control joints to the slab, not a generic template, so cracking stays controlled along the joint lines.

Concrete patios & walkways FAQ

What's the difference between broom finish and exposed aggregate?

Broom finish is a textured, non-slip surface swept into the wet concrete — the standard, most affordable option. Exposed aggregate exposes the decorative stone within the mix for a more textured, upscale look, and costs more in labor and material.

Can you tie a new patio into an existing slab?

Yes — we saw-cut and dowel into existing concrete where needed so the new pour ties in cleanly instead of just butting up against it.

Ready to start your Concrete patios & walkways project?
Get a free quote today!

Call nowFree quote